|
PARTICULARS |
| Length: 200' |
| Breadth: 60' |
| Depth: 12' |
| Flag: Canadian |
| ABS Load Line Certificate is current |
|
HULL |
| Plate thickness |
| Deck: .625" |
| Bottom: .5" |
| Side Shell: .375" |
|
DECK MACHINERY |
| Anchor Winches: (4) Timberland Electric 500-1-40E Dynamic
Positioning winches. |
| Winch operation: Alan Bradley control system complete with
dynamic braking heaters. |
| Fairleads: (4) New in 2009, Smith Berger Model MD-2614 (Double
Sheave) |
| Spuds: (2) 40" square x 85' long, (2) Custom heavy raised spud
wells, (1) Flush deck usable spud well |
| Spud Winches: (2) Timberland 500-1-40E Electric |
| Generators: (1) 2010 Perkins 180kw 4215 hrs., (1) 2009 John
Deere Whisperwatt 60kw 2662 hrs. |
| House on Deck: 16' x 34' x 9', (6) dog
watertight doors, and a 10' x 12' tool room (ABS approved) |
| Control House: 6' x 6' x 7.5' (2) dog watertight doors |
| (1) 2000gals. fuel tank double walled and fire proof. |
|
ELECTRICAL |
| All electrical power and control cables have been installed
below deck in wire traces. Also run through watertight bulkhead penetrations.
(ABS approved) |
| 110v/220 3-phase outdoor outlets at each end of the barge.
Vessel has 408 & 280 3-phase shore power receptacles. (1) 200 Amp transformer |
|
MAINTENANCE |
| Dry docked in April of 2009 blasted, painted, and all zinc's
were renewed. All voids were recently scaled by hand and recoated with Amerloc
sealer. |
| The house has two coats of epoxy top coated with polyurethane.
The hull was also epoxy coated. The barge has been in fresh water since 2008. |
|
TERMS |
| Location: Northwest |
| Price: $2,450,000 |
