|
GENERAL |
|
New barge built July 2008 |
| Length: 140' |
| Width: 40' |
| Depth: 7' |
|
DWT: Approximate 240 tons |
|
COMPARTMENTS: 10
watertight; barge has a single long. centerline bulkhead, raked bow,
square stern |
|
HULL: Bottom and Sides
3/8”; Stern Transom Plate 1/2”; Stern Corners 3/4”; Bow Head-log
3/4” |
|
INTERNAL FRAMES |
|
All
Bulkheads 3/8”, with 6” x 4” x 5/16” angle stiffeners, Long. Deck Frames
6” x 4” x 5/16” angle on 18” centers |
|
Long. Floor Frames 6” x 4” x 5/16” angle on 18” centers, Long. Side
Frames 6” x 4” x 5/16” angle on 18” centers |
|
Stern Corner Gussets 1/2”; All other Gussets 3/8”, Vert. Head-log
Stiffeners 10” channel on 18” centers |
|
Vert. Stern Transom Stiffeners 10” channel on 18” centers,
Stern Transom Long. Trusses (4) 10” channel “K” frames with 6” x
4” x 5/16” diagonals |
|
Transverse Trusses on 6’ 9” centers: Upper Chords 10” channel, Lower
Chords 12” channel, Vert. Stiffeners & Vert. Side Chords 10” channel,
|
|
Diagonal Stiffeners 6” x 4” x 5/16” angle |
|
DECK |
|
Deck Load Capacity is
calculated at 2200 lbs. psi, 1/2” (Non-skid) |
|
FENDER SYSTEM: 5/8”
split-pipe fender for length each side, with water stops and beveled
ends bow and stern |
|
SPUDS/SPUD-WELLS: No
spuds / (2) 29” x 10’ square spud wells w/1½” w/plates |
|
COATINGS: Exterior: SP6
blast; apply approx 14-16 mils Hempel Hempadur Multi- Strength
45751/45753 Epoxy System in 2 coats; deck is non-skid |
|
Interior: Apply Hempel
Bio Float (4 mils) |
|
DECK FITTINGS |
|
(1)
36” centerline kevel bow and stern |
|
(1)
set of 10” double bitts (timberheads) at each corner |
|
(1)
36” midship kevel each side |
|
(2)
36” quarter kevels each side |
|
(10)
18” NABRICO DF-40 flush-mount deck hatches & lids |
|
COMMENTS |
|
This
is an unused, heavily-built spud barge constructed in July of 2008.
Spuds are not included in quoted price, but client may purchase spuds to
their specs through a separate manufacturer. This barge is fully coated
exterior and interior; the quoted price includes both coatings. The
accompanying photos were taken prior to safety yellow deck fitting/deck
hatch lid coating and yellow draft numbers being added. |
|
TERMS |
| Location: KY |
| Price: $605,000 |
